|
|
|
|
|
|
Port forwarding
Zultrax P2P needs to have access to the internet. In order to make optimal use of your connection Zultrax P2P needs to be capable of making outgoing connections and accepting incoming connections.
For the outgoing connections no special action is needed. For allowing incoming connections your router needs to be instructed to forward a port. For your Airlink 101 AR430W router follow the steps below to do so.
Airlink 101 AR430W
|
|
|
|
Other programs
We list here the steps needed to forward a port for Zultrax P2P. There are other programs (on-line games, file sharing and others) that also need port forwarding. Port forwarding is simular for all programs, only the port number is different. If you need to forward a port for another program than Zultrax P2P and you know the port number, use the steps below with that port number and it will work out fine.
|
|
|
|
|
|
|
|
|
|
|
|
Step by step - port forwarding - Airlink 101 AR430W
|
|
|
|
|
|
|
1.
|
|
|
In the next steps we will configure your router in such a way that the router allows Zultrax P2P to accept incoming connections. Your router is designed to serve multiple computers and of course multiple programs. Even if there is only one computer connected we will later on need two bits of information:
- The local IP of your computer
- The port used by Zultrax P2P
|
|
Zultrax P2P can help you to find those two bits of information. In the menu tools choose system info. This will display a page of information with various details about the program amonst which Local IP and port. Write those 2 down, you'll need them later.
It is the Local IP we are looking for, do not confuse the Local IP with the Public IP that is also shown on this system info page.
|
|
|
|
2.
|
|
Exit Zultrax P2P. Don't leave the program running while you are performing the actions below. Leaving the program running might give you false indiciations that your actions where not succesfull.
|
|
|
|
3.
|
|
Open a webbrowser (e.g. Internet Explorer, Firefox or Opera). Enter the IP address of your router in the address bar of the browser and press enter. The IP address of your router is by default 192.168.1.1
|
|
|
4.
|
|
You see a box asking your username and password. By default the username for your Airlink 101 AR430W router is admin and the password is admin
Enter your username and password and click the ok button to continue.
|
|
|
5.
|
|
Click the link applications & gaming.
You find this link on the top of the page.
|
|
|
6.
|
|
The menu under that will change. Select port range forwarding in the new menu.
|
|
|
7.
|
|
You see a page titled Port Range Forwarding. Enter the fields as follows: | Application Name | Zultrax P2P | | Start Port | The port number you wrote down earlier | | End Port | Again the port number you wrote down earlier | | Protocol | Both | | To IP address | The local IP address you wrote down earlier | | Enabled | Put a checkmark in this box to enable | | Schedule | Always | | |
|
|
|
|
8.
|
|
Click on the button save settings.
You find this button on the bottom of the page.
|
|
|
9.
|
|
|
|
Your Airlink 101 AR430W router is configured now. You forwarded a port for Zultrax P2P. You can start Zultrax P2P and you will see incoming connections coming up. This might be not immediatly after start up but within minutes you should see at least some incoming connections. The program will adapt itself to the new configuration.
In case you still don't have incoming connections, perhaps you also have firewall software installed that needs configuration. For that see
the Firewalls/Routers page
, the info about firewall software is somewhere at the bottom of that page.
|
|
|
|
|
|
|
|
|
|
Local Static IP
|
|
|
|
|
IMPORTANT : Depending on your exact configuration it is possible with the Airlink 101 AR430W router that after a while you might be again without incoming connections. If this is the case, your router gives your computer a Dynamic Local IP Address. Often that is no problem as long as that Dynamic Local IP Address is always the same. As soon as you lose your incoming connections, you can assume it is not always the same.
In this case you can best define a Static Local IP Address for your router. We have a manual for this
here.
After you defined a Static Local IP Address, best use the Settings in the Tools menu of Zultrax P2P and change the port number, to e.g. 6347 and afterwards repeat the steps as mentioned above.
We advice you to only do this in case you lost your initial incoming connections again. Otherwise, it is most likely not needed to start making changes in your computers settings.
|
|
|
|
|
|
!
|
The information above is based on the manual of your Airlink 101 router and the experience of other Zultrax P2P users. We took great care in providing accurate information. If you still find the information provided here in some way incorrect, please
let us know
.
|
|
P2P File sharing software
as Zultrax P2P functions at its best when your router is configured with a forwarded port. Above you find information on how to do so for the Airlink 101 AR430W router.
|
|
|
|
|
|
|
