|
|
|
|
|
|
Forward a port
For optimal performance Zultrax P2P needs to be capable of accepting incoming connections. Your D-link DIR-615 router by default blocks incoming connections unless a port is forwarded. Follow the steps listed below to forward a port for Zultrax P2P.
D-link DIR-615
|
|
|
|
Other programs
The steps listed below help you to forward a port for Zultrax P2P. Some other software, e.g. some on-line games, also require you to forward a port. Each program requests its own port number. If you know which port number a program requests, you can use the steps listed below and forward a port for that program the same way.
|
|
|
|
|
|
|
!
|
For product info, a downloadable manual if available and other details about D-link routers, see the
D-link routers overview
|
|
|
|
|
|
|
Step by step - port forwarding - D-link DIR-615
|
|
|
|
|
|
|
1.
|
|
|
In the next steps we will configure your router in such a way that the router allows Zultrax P2P to accept incoming connections. Your router is designed to serve multiple computers and of course multiple programs. Even if there is only one computer connected we will later on need two bits of information:
- The local IP of your computer
- The port used by Zultrax P2P
|
|
Zultrax P2P can help you to find those two bits of information. In the menu tools choose system info. This will display a page of information with various details about the program amonst which Local IP and port. Write those 2 down, you'll need them later.
It is the Local IP we are looking for, do not confuse the Local IP with the Public IP that is also shown on this system info page.
|
|
|
|
2.
|
|
Exit Zultrax P2P. Don't leave the program running while you are performing the actions below. Leaving the program running might give you false indiciations that your actions where not succesfull.
|
|
|
|
3.
|
|
Open a webbrowser (e.g. Internet Explorer, Firefox or Opera). Enter the IP address of your router in the address bar of the browser and press enter. The IP address of your router is by default 192.168.0.1
|
|
|
4.
|
|
You see a box asking your username and password. By default the username for your D-link DIR-615 router is admin and the password is blank
Enter your username and password and click the log in button to continue.
|
|
|
5.
|
|
Click on the button advanced.
You find this button on the top of the page.
|
|
|
6.
|
|
Click on the button port forwarding.
You find this button on the left of the page.
|
|
|
7.
|
|
You see a page titled Port Forwarding Rules. Find the first free row, put a checkmark in the checkbox and enter the fields as follows: | Name | Zultrax P2P | | IP Address | The local IP address you wrote down earlier | | Ports TCP | The port number you wrote down earlier | | Ports UDP | The port number you wrote down earlier | | Schedule | Always | | Inbound filter | Allow all | | |
|
|
|
|
8.
|
|
Click on the button save settings.
You find this button on the top of the page.
|
|
|
9.
|
|
|
|
Your D-link DIR-615 router is configured now. You forwarded a port for Zultrax P2P. You can start Zultrax P2P and you will see incoming connections coming up. This might be not immediatly after start up but within minutes you should see at least some incoming connections. The program will adapt itself to the new configuration.
In case you still don't have incoming connections, perhaps you also have firewall software installed that needs configuration. For that see
the Firewalls/Routers page
, the info about firewall software is somewhere at the bottom of that page.
|
|
|
|
|
|
|
|
|
|
Local Static IP
|
|
|
|
|
IMPORTANT : Depending on your exact configuration it is possible with the D-link DIR-615 router that after a while you might be again without incoming connections. If this is the case, your router gives your computer a Dynamic Local IP Address. Often that is no problem as long as that Dynamic Local IP Address is always the same. As soon as you lose your incoming connections, you can assume it is not always the same.
In this case you can best define a Static Local IP Address for your router. We have a manual for this
here.
After you defined a Static Local IP Address, best use the Settings in the Tools menu of Zultrax P2P and change the port number, to e.g. 6347 and afterwards repeat the steps as mentioned above.
We advice you to only do this in case you lost your initial incoming connections again. Otherwise, it is most likely not needed to start making changes in your computers settings.
|
|
|
|
|
|
!
|
The information above is based on the manual of your D-link router and the experience of other Zultrax P2P users. We took great care in providing accurate information. If you still find the information provided here in some way incorrect, please
let us know
.
|
|
P2P File sharing software
as Zultrax P2P functions at its best when your router is configured with a forwarded port. Above you find information on how to do so for the D-link DIR-615 router.
|
|
|
|
|
|
|
