|
1.
|
|
|
In the next steps we will configure your router in such a way that the router allows Zultrax P2P to accept incoming connections. For this we need first to look up the port number used by Zultrax P2P. By default this port number is set to 6346 but it could be that you changed this number.
Zultrax P2P can help you to find the port number. In the menu tools choose system info. This will display a page of information with various details about the program amonst which port. Write the given number for port down, you'll need it later.
|
|
|
|
|
2.
|
|
Exit Zultrax P2P. Don't leave the program running while you are performing the actions below. Leaving the program running might give you false indiciations that your actions where not succesfull.
|
|
|
|
3.
|
|
Open a webbrowser (e.g. Internet Explorer, Firefox or Opera). Enter the IP address of your router in the address bar of the browser and press enter. The IP address of your router is by default 192.168.1.1
|
|
|
4.
|
|
You see a box asking for your password. By default the password is blank
Enter your password and click the login button to continue.
|
|
|
5.
|
|
Click the link advanced setup.
You find this link on the center of the page.
|
|
|
6.
|
|
Click the link nat.
You find this link on the left of the page.
|
|
|
7.
|
|
A new menu is displayed. In this menu click virtual servers
|
|
|
8.
|
|
Put a dot into the define service manually radio button.
|
|
|
9.
|
|
You see a page titled Virtual Servers (Port Forwarding). Enter the fields as follows: | PVC Name | Leave this as it is | | How you define... | Define service manually | | Service name | Zultrax P2P | | Source IP Address | All | | Protocol | TCP | | External port | In both fields, the port number you wrote down earlier | | Internal port | Again in both fields the port number | | |
|
|
|
|
10.
|
|
Put a dot in the List of active booked in devices. Now you can select your computer in the dropdown box below it. This lists all computers connected to your router.
|
|
|
11.
|
|
Click on the button add to the list.
|
|
|
12.
|
|
Click on the button apply.
You find this button on the bottom of the page.
|
|
|
13.
|
|
|
|
Your Siemens Gigaset SE515 router is configured now. You forwarded a port for Zultrax P2P. You can start Zultrax P2P and you will see incoming connections coming up. This might be not immediatly after start up but within minutes you should see at least some incoming connections. The program will adapt itself to the new configuration.
In case you still don't have incoming connections, perhaps you also have firewall software installed that needs configuration. For that see
the Firewalls/Routers page
, the info about firewall software is somewhere at the bottom of that page.
|
|
|
|
