|
1.
|
|
|
In the next steps we will configure your router in such a way that the router allows Zultrax P2P to accept incoming connections. For this we need first to look up the port number used by Zultrax P2P. By default this port number is set to 6346 but it could be that you changed this number.
Zultrax P2P can help you to find the port number. In the menu tools choose system info. This will display a page of information with various details about the program amonst which port. Write the given number for port down, you'll need it later.
|
|
|
|
|
2.
|
|
Exit Zultrax P2P. Don't leave the program running while you are performing the actions below. Leaving the program running might give you false indiciations that your actions where not succesfull.
|
|
|
|
3.
|
|
Open a webbrowser (e.g. Internet Explorer, Firefox or Opera). Enter the IP address of your router in the address bar of the browser and press enter. The IP address of your router is by default 10.0.0.138
|
|
|
4.
|
|
You see a box asking your username and password.
By default the username and password for your Thomson-Alcatel SpeedTouch 530v6 router are both admin
Enter your username and password and click the ok button to continue.
|
|
|
5.
|
|
Click on the button toolbox.
You find this button on the left of the page.
|
|
|
6.
|
|
Click the link game & application sharing.
You find this link on the left of the page.
|
|
|
7.
|
|
Click the link create a new game or application.
You find this link on the bottom of the page.
|
|
|
8.
|
|
Enter "Zultrax" in the field name. You can enter in this field what you want, it is descriptive so you later know what this line is about.
|
|
|
9.
|
|
Put a dot into the manual entry of port maps radio button.
|
|
|
10.
|
|
Click on the button next.
You find this button on the bottom of the page.
|
|
|
11.
|
|
You see a new page. In the section Game or Application Definition enter the field as follows: | Protocol | ANY | | Port range | In both fields the port number you wrote down earlier | | Translate to | Again the port number you wrote down earlier | | Trigger Protocol | ANY | | Trigger port | Leave this field empty | | |
|
|
|
|
12.
|
|
Click on the button add.
|
|
|
13.
|
|
Click on the button apply.
You find this button on the top of the page.
|
|
|
14.
|
|
Click the link assign a game or application to a local network device.
You find this link on the bottom of the page.
|
|
|
15.
|
|
Choose a computer to forward ports to in the device box. This box contains a list of all computers on your network. If you do have only one computer connected it shows only that computer.
|
|
|
16.
|
|
Select Zultrax in the game or application drop down list and click add to enable Zultrax.
|
|
|
17.
|
|
|
|
Your Thomson-Alcatel SpeedTouch 530v6 router is configured now. You forwarded a port for Zultrax P2P. You can start Zultrax P2P and you will see incoming connections coming up. This might be not immediatly after start up but within minutes you should see at least some incoming connections. The program will adapt itself to the new configuration.
In case you still don't have incoming connections, perhaps you also have firewall software installed that needs configuration. For that see
the Firewalls/Routers page
, the info about firewall software is somewhere at the bottom of that page.
|
|
|
|
