|
|
|
|
|
|
Port forwarding
Zultrax P2P needs to have access to the internet. In order to make optimal use of your connection Zultrax P2P needs to be capable of making outgoing connections and accepting incoming connections.
For the outgoing connections no special action is needed. For allowing incoming connections your router needs to be instructed to forward a port. For your Zonet ZSR1124WE router follow the steps below to do so.
Zonet ZSR1124WE
|
|
|
|
Other programs
The steps listed below help you to forward a port for Zultrax P2P. Some other software, e.g. some on-line games, also require you to forward a port. Each program requests its own port number. If you know which port number a program requests, you can use the steps listed below and forward a port for that program the same way.
|
|
|
|
|
|
|
!
|
For product info, a downloadable manual if available and other details about Zonet routers, see the
Zonet routers overview
|
|
|
|
|
|
|
Step by step - port forwarding - Zonet ZSR1124WE
|
|
|
|
|
|
|
1.
|
|
|
In the next steps we will configure your router in such a way that the router allows Zultrax P2P to accept incoming connections. Your router is designed to serve multiple computers and of course multiple programs. Even if there is only one computer connected we will later on need two bits of information:
- The local IP of your computer
- The port used by Zultrax P2P
|
|
Zultrax P2P can help you to find those two bits of information. In the menu tools choose system info. This will display a page of information with various details about the program amonst which Local IP and port. Write those 2 down, you'll need them later.
It is the Local IP we are looking for, do not confuse the Local IP with the Public IP that is also shown on this system info page.
|
|
|
|
2.
|
|
Exit Zultrax P2P. Don't leave the program running while you are performing the actions below. Leaving the program running might give you false indiciations that your actions where not succesfull.
|
|
|
|
3.
|
|
Open a webbrowser (e.g. Internet Explorer, Firefox or Opera). Enter the IP address of your router in the address bar of the browser and press enter. The IP address of your router is by default 192.168.1.1
|
|
|
4.
|
|
You see a box asking your username and password.
By default the username and password for your Zonet ZSR1124WE router are both guest
Enter your username and password and click the ok button to continue.
|
|
|
5.
|
|
Click on the button nat.
You find this button on the left of the page.
|
|
|
6.
|
|
In the section Virtual Server Setup enter the fields as follows: | Rule name | Zultrax P2P | | Internal Server IP Addrss | The local IP address you wrote down earlier | | Protocol | TCP | | External Port | The port number you wrote down earlier | | Internal Port | Again the port number you wrote down earlier | | |
|
|
|
|
7.
|
|
Click on the button add.
|
|
|
8.
|
|
Click on the button save.
You find this button on the top of the page.
|
|
|
9.
|
|
|
|
Your Zonet ZSR1124WE router is configured now. You forwarded a port for Zultrax P2P. You can start Zultrax P2P and you will see incoming connections coming up. This might be not immediatly after start up but within minutes you should see at least some incoming connections. The program will adapt itself to the new configuration.
In case you still don't have incoming connections, perhaps you also have firewall software installed that needs configuration. For that see
the Firewalls/Routers page
, the info about firewall software is somewhere at the bottom of that page.
|
|
|
|
|
|
|
|
|
|
Local Static IP
|
|
|
|
|
IMPORTANT : Depending on your exact configuration it is possible with the Zonet ZSR1124WE router that after a while you might be again without incoming connections. If this is the case, your router gives your computer a Dynamic Local IP Address. Often that is no problem as long as that Dynamic Local IP Address is always the same. As soon as you lose your incoming connections, you can assume it is not always the same.
In this case you can best define a Static Local IP Address for your router. We have a manual for this
here.
After you defined a Static Local IP Address, best use the Settings in the Tools menu of Zultrax P2P and change the port number, to e.g. 6347 and afterwards repeat the steps as mentioned above.
We advice you to only do this in case you lost your initial incoming connections again. Otherwise, it is most likely not needed to start making changes in your computers settings.
|
|
|
|
|
|
!
|
The information above is based on the manual of your Zonet router and the experience of other Zultrax P2P users. We took great care in providing accurate information. If you still find the information provided here in some way incorrect, please
let us know
.
|
|
P2P File sharing software
functions at its best when your router is configured with a forwarded port. Above you find information on how to do so for the Zonet ZSR1124WE router.
|
|
|
|
|
|
|
