|
|
|
|
|
|
Port forwarding
Zultrax P2P needs to have access to the internet. In order to make optimal use of your connection Zultrax P2P needs to be capable of making outgoing connections and accepting incoming connections.
For the outgoing connections no special action is needed. For allowing incoming connections your router needs to be instructed to forward a port. For your ZyXEL ZyWALL 100 router follow the steps below to do so.
|
|
|
|
Other programs
We list here the steps needed to forward a port for Zultrax P2P. There are other programs (on-line games, file sharing and others) that also need port forwarding. Port forwarding is simular for all programs, only the port number is different. If you need to forward a port for another program than Zultrax P2P and you know the port number, use the steps below with that port number and it will work out fine.
|
|
|
|
|
|
|
!
|
For product info, a downloadable manual if available and other details about ZyXEL routers, see the
ZyXEL routers overview
|
|
|
|
|
|
|
Step by step - port forwarding - ZyXEL ZyWALL 100
|
|
|
|
|
|
|
1.
|
|
|
In the next steps we will configure your router in such a way that the router allows Zultrax P2P to accept incoming connections. Your router is designed to serve multiple computers and of course multiple programs. Even if there is only one computer connected we will later on need two bits of information:
- The local IP of your computer
- The port used by Zultrax P2P
|
|
Zultrax P2P can help you to find those two bits of information. In the menu tools choose system info. This will display a page of information with various details about the program amonst which Local IP and port. Write those 2 down, you'll need them later.
It is the Local IP we are looking for, do not confuse the Local IP with the Public IP that is also shown on this system info page.
|
|
|
|
2.
|
|
Exit Zultrax P2P. Don't leave the program running while you are performing the actions below. Leaving the program running might give you false indiciations that your actions where not succesfull.
|
|
|
|
3.
|
|
Open a webbrowser (e.g. Internet Explorer, Firefox or Opera). Enter the IP address of your router in the address bar of the browser and press enter. The IP address of your router is by default 192.168.1.1
|
|
|
4.
|
|
You see a box asking for your password. By default the password is 1234
Enter your password and click the ok button to continue.
|
|
|
5.
|
|
Click the link sua/nat.
You find this link on the left of the page.
|
|
|
6.
|
|
Find the first free row in the page you see now and enter the fields as follows: | Active | Put a checkmark to make active | | Name | Zultrax P2P | | Start Port No. | The port number you wrote down earlier | | End Port No. | Again the port number you wrote down earlier | | Server IP Address | The Local IP Address you wrote down earlier | | |
|
|
|
|
7.
|
|
Click on the button apply.
You find this button on the bottom of the page.
|
|
|
8.
|
|
|
|
Your ZyXEL ZyWALL 100 router is configured now. You forwarded a port for Zultrax P2P. You can start Zultrax P2P and you will see incoming connections coming up. This might be not immediatly after start up but within minutes you should see at least some incoming connections. The program will adapt itself to the new configuration.
In case you still don't have incoming connections, perhaps you also have firewall software installed that needs configuration. For that see
the Firewalls/Routers page
, the info about firewall software is somewhere at the bottom of that page.
|
|
|
|
|
|
|
|
|
|
Local Static IP
|
|
|
|
|
IMPORTANT : Depending on your exact configuration it is possible with the ZyXEL ZyWALL 100 router that after a while you might be again without incoming connections. If this is the case, your router gives your computer a Dynamic Local IP Address. Often that is no problem as long as that Dynamic Local IP Address is always the same. As soon as you lose your incoming connections, you can assume it is not always the same.
In this case you can best define a Static Local IP Address for your router. We have a manual for this
here.
After you defined a Static Local IP Address, best use the Settings in the Tools menu of Zultrax P2P and change the port number, to e.g. 6347 and afterwards repeat the steps as mentioned above.
We advice you to only do this in case you lost your initial incoming connections again. Otherwise, it is most likely not needed to start making changes in your computers settings.
|
|
|
|
|
|
!
|
The information above is based on the manual of your ZyXEL router and the experience of other Zultrax P2P users. We took great care in providing accurate information. If you still find the information provided here in some way incorrect, please
let us know
.
|
|
Zultrax P2P is a
P2P File sharing program
. Your ZyXEL router needs configuration in order to allow P2P file sharing software to function at its best. Above you find the steps to do so.
|
|
|
|
|
|
|
